Hi-Bond Clear Table Top Resin

Description

Hi-Bond Clear Table Top Resin

Hi-Bond Clear Table Top epoxy coating for bar tops, tabletops, plaques, etc.

• Dries to a high gloss finish.
• Mix ratio is 1 part hardener to 1 part resin.
• Used in restaurants all over the U.S.

The quart kit is a quart total volume when combined with hardener.

Hi-Bond Clear Table Top Resin Application Instructions

• Hi-Bond Table Top Epoxy should be stored at room temperature for at least 24 hours prior to usage.
• Measure exact equal parts of the resin and the hardener into a clean, dry container.
• Note: Do not adjust the ratio in an attempt to adjust the working time.
• Mix the resin and the hardener together. Mix well for two or three minutes until the materials are thoroughly mixed.
• Note: Ensure sidewalls and bottom are blended into the mix.
• Pour the mixed product onto the surface and spread using a brush. The material is self-leveling and will eventually level out any paths left by a brush.
• Allow the material to cure overnight. Depending on temperature, it may take as long as 24 hours for the material to cure.

Instructions from Hi-Bond Table Top Epoxy Preparation, Mixing and Application Guide.